18V-50VDC 0A-35A Brushless DC Motor Driver BLD300 For 0 - 300W BLDC Motor
Chi tiết sản phẩm
35A Brushless DC Motor Driver
,50VDC Brushless DC Motor Driver
,300W BLDC Motor Driver
18V~50VDC 0A-35A Brushless Dc Motor Driver BLD300 For 0 - 300w BLDC Motor
Description:
The JKBLD300 is a high performance, cost-effective 3 phase BLDC motor drive which can provide power output 300VA max. The design is based on advanced DSP technology and feature high torque, low noise, low vibration, PID speed loop, PID current loop, over current protection, over load protection.
Electrical Specifications:
| Parameter | Min | Rated | Max | Unit |
| Motor Hall Sensor Angle | 120°/240° | |||
| DC Power Input | 18 | 48 | 50 | V |
| Drive Current Output | 0 | 15 | 35 | A |
| Suitable Motor Speed | 0 | 20000 | rpm | |
| Hall Sensor Voltage | 4.5 | 5 | 5.5 | V |
| Hall Sensor Current | 20 | mA | ||
| External Potentiometer | 10K | Ω | ||
Connection Definition:
| Mark | Definition |
| DC+/DC- | DC Power Input (DC24V~DC48V) |
| U,V,W | Motor lead wire |
| Hu,Hv,Hw | Hall sensor lead wire |
| REF+ | Hall sensor power supply + |
| REF- | Hall sensor power supply - |
| VCC | External potentiometer power supply + |
| SV | External potentiometer |
| COM | Public (low level) |
| F/R | Direction: High level/CW Low Level/CCW |
| EN | Enable: High Level/Stop Low Level/Run |
| BRK | Quick Brake: High Level/Stop Low Level/Run |
| SPEED | Speed signal output |
| ALARM | Alarm signal output |
|
Speed Adjustment Instruction: A. Motor speed adjusted by the internal potentiometer B. Motor speed adjusted by the external potentiometer C. Motor speed adjusted by analog signal 0V~+5V input D. Motor speed adjusted by analog signal 0V~+10V input E. Motor speed adjusted by PWM input: Pulse duty ratio 10%-90% / Speed linear modulation Pulse rate: 1K-10K/ pulse amplitude 5V |
Motor Speed Quick Response Setting: RV OP/CL Connected (user setting):
PID Closed loop－Motor quick response
OP/CL Disconnected (factory setting):
NO PID Closed loop－Motor normal response
Lead Wire Connection:
Take care of the sequence of U,V,W
|
Peak Power Setting:
Note: To protect the motor, set the arrow number as the same as the motor nominated power. Whenever overload occurs the drive will turn out to be the protection mode.
Mechanical Drawings:
Indicator Instruction:
| Indicator | Green | Power indicator |
| Red | Over-current, hall error | |
| Red flickering | Stall/over-heat/over-voltage protection |
-
86BLF90 NEMA 34 48V Brushless DC Motor 86x86mm 3 Phase 220W For Industrial Automation Equipment
Động cơ bước Nema34 mang lại mô-men xoắn 9N·m với độ chính xác bước 1,8°. Có mô-men xoắn cao, hoạt động ổn định, độ rung thấp và định vị tuyệt vời cho các ứng dụng tự động hóa công nghiệp và in 3D. -
NEMA 52 130x130mm Three Phase Brushless DC Motor 310V 1200W-4700W Brushless BLDC Motor
Động cơ bước Nema34 mang lại mô-men xoắn 9N·m với độ chính xác bước 1,8°. Có mô-men xoắn cao, hoạt động ổn định, độ rung thấp và định vị tuyệt vời cho các ứng dụng tự động hóa công nghiệp và in 3D. -
BLD-120 BLDC Driver 12V-30VDC For 120W Brushless Dc Motor 0A - 8A
BLD-120 BLDC Driver For 120W Brushless Dc motor 0A - 8A Parameters Min Rated Max Unit Hall effect angle 120°/240° Power supply input voltage 12 24 30 V Driver current output 5 8 A Motor speed 0 20000 rpm Hall signal voltage 4.5 5 5.5 V Hall signal current 20 mA External potentiometer 10K Ω Mark define DC+/DC- Power supply input (DC12V~DC30V)don’t make mistake for + and - U,V,W Motor leading wires connect thick wires Hu,Hv,Hw Hall signal leading wire connect (thin wires Hu, Hv -
Nema 24 Integrated Stepper Servo Motor IP30 IP54 IP65 for Medical equipment
Nema 24 ISS60-2.0N·m Integrated Stepper Servo Motor With 60mm Square Flange Pulse, RS485, CANopen Control And Integrated Driver Nema 24 ISS60-2.0N·m 60x60x88mm integrated stepper servo motor with pulse/RS485/CANOpen control, 1.8Degree, 4.2A, 0.5Ω, 2.0N.m with 17bit encoder and integrated driver. Please contact us for more different integrated servo motor requirements!!! Physical Specifications: Frame Size: Nema 24 (60x60mm) Body Length: 88mm Shaft Diameter: 8mm Shaft Length:
